BTYKL - LATEX UNDERCOAT WHITE
- MSDS: BTYKL
- Manufacturer: COWMAN CAMPBELL PAINT CO
- Product Name: LATEX UNDERCOAT WHITE
- National Stock Number: 8010-00N048016
Product Identification
Product ID:LATEX UNDERCOAT WHITE
MSDS Date:05/01/1986
FSC:8010
NIIN:00N048016
MSDS Number: BTYKL
Responsible Party
SEATTLE, WA 98107
US
Emergency Phone: 206-783-8835
Info Phone: 206-783-8835
Cage: HO230
Contractor
Cage: HO230
Ingredients
ETHYLENE GLYCOL
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: <3%
OSHA PEL 50 PPM, C
ACGIH TLV: 50 PPM, VAPOR, C
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN: PROLONGED OR REPEATED
CONTACT W/PRODUCT MAY CAUSE SKIN IRRITATION. EYE: DIRECT CONTACT
WITH PRODUCT MAY RESULT IN IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE: PROMPTLY & THORO WASH EYES W/WATER FOR @ LST 15 MINUTES
& CONSULT PHYSICIAN IF IRRITATION PERSISTS. SKIN: WASH THORO WITH
SOAP AND WATER; IF DRENCHED, REMOVE AND WASH CLOTHING BEFORE REUSE.
INGES T: GIVE 2 GLASSES OF WATER TO DRINK. CALL A PHYSICIAN. DO NOT
GIVE ANYTHING BY MOUTH TO AN UNCON PERSON. INHAL: REMOVE TO FRESH
AIR. SUPPORT BRTHG (GIVE O*2/ARTF RESP) .
Fire Fighting
Flash Point:NONE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Accidental Release
Spill Release Procedures:CONTAIN SPILL AND TRANSFER TO CONTAINERS FOR
RECOVERY. PICK UP REMAINING MATERIAL WITH ABSORBENT SUCH AS
DIATOMACEOUS EARTH OR SAWDUST.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. KEEP FROM FREEZING. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE REQUIRED IF GOOD VENTILATION IS MAINTAINED.
USE NIOSH/MSA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF
CONCERN .
Ventilation:LOCAL EXHAUST: USE ADEQUATE VENTILATION TO KEEP AIRBORNE
CONCENTRATIONS LOW.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES.
Other Protective Equipment:AVOID PRLNGD SKIN CONT W/MATL. WHEN PAINT
DRYS IT BECOMES DFCLT TO REMOVE. EYE WASH FACILS MTG ANSI DSGN
CRITER (SUPDAT)
Work Hygienic Practices:WASH HANDS THORO BEFORE EATING, DRINKING,
SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
OTHER PROT EQUIP: SHOULD BE ACCESSIBLE IN WORK AREA.
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:WATER
Vapor Density:>1
Spec Gravity:1.5(H*2O=1)
Evaporation Rate & Reference:1(H*2O=1)
Solubility in Water:WATER.
Appearance and Odor:OPAQUE WHITE OR PAINT COLORS
Percent Volatiles by Volume:68
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE.
Disposal
Waste Disposal Methods:DISPOSE OF SPILLED PRODUCT AND ABSORBED MATERIAL
IN AN APPROVED LOCAL, FEDERAL OR STATE DISPOSAL SITE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.